How to Fill Vaporesso Pod: A Step-by-Step Guide for Beginners

May 29, 2025
by Ahmad Sarfraz

Whether you're new to vaping or recently purchased a Vaporesso device, you will first need to learn about filling a Vaporesso pod! If you own a Vaporesso XROS Nano, or any other pod from the Vaporesso family of pods, it is crucial to understand how to fill the pod, as this will help you set up for a better vaping experience.

In this overall guide on vaporesso pod filling, we will go through the exact steps to fill a, maintenance, mistakes and FAQs, while also providing you with the best place to purchase in the UK, which is Vape Villa.

Why Properly Filling Your Vaporesso Pod Matters

When using e-cigarettes, consistency and flavour quality from your device relies heavily on how well it is filled.

An underfilled or overfilled pod can lead to leaking
Dry hits
Coil longevity and consistent flavour or vapour production

Learning how to fill your pod correctly will allow you to have a better experience and use your components for longer.

What You'll Need Before You Start

Before we get to the steps, let's make sure you have the following prepared:

Your Vaporesso device (such as the Vaporesso XROS Nano)
An appropriate Vaporesso pod
Your preferred vape juice
A clean working area
A tissue or paper towel (for any spills)

Step-by-Step: How to Fill Vaporesso Pod

Once your comfortable with your Vaporesso pod filling is a fairly straightforward process. Below are all of the universal steps but always refer back to the specific instructions for your model.

Step One: Remove the Pod from the device

Hold onto your Vaporesso vape device firmly and pull the pod out of the battery compartment. This should be a magnetic pull for most models like the Vaporesso XROS Nano.

Step Two: Open the Fill Port

Most Vaporesso pods operate on a top fill system. You normally have to snap off the mouthpiece to expose the fill port (just apply a bit of pressure to one side). When the mouthpiece is off you should see the filling port. Most likely a red or black rubber valve or a visible hole.

💡 Caution: Take care when removing the mouthpiece not to inflict damage on the pod itself. Don't use a sharp tool.

Step Three: Fill the Pod with e-liquid

Place the nozzle from the e-liquid bottle into the fill port. Squeeze slowly and keep track of the barrel of juice that enters into the pod. There are usually a max fill line on almost all pods, so stay under that mark so you don't have any leakage after you re-assemble your Vaporesso pod.

Step 4: Seal and Reassemble

Once filled, close the fill port securely or push the mouthpiece back into place. Make sure everything is sealed well enough to avoid leaks.

Step 5: Let the Pod Sit (priming)

If you have a brand new pod or coil, give the pod 5-10 minutes without any vaping at all. This allows the cotton inside the coil to soak up the e-liquid properly and avoid any dry, burnt hits.

Common Avoidable Mistakes

Even the most seasoned vapor can still make these mistakes:

1. Overfilling the Pod

Excess liquid could result inleaks and gurgling noises.

2. Neglecting to Wait

Using the pod right away will burn the coil and ruin you pod in an instant.

3. Using the Wrong E-liquid

High VG e-liquids may be too thick for certain Vaporesso Pods. Unless otherwise mentioned, stick with a 50/50 VG/PG blend.

How Often Should You Refill a Vaporesso Pod?

This is based on your usage patterns of e-liquid or number of puffs with your vaping device. On a typical day:

Light users usually fill the tank 1 time every 1-2 days.
Moderate to heavy users may need to refill 1-2 times per day.

You will know when to refill the pod by looking through the clear pod window to see how much e-liquid you have left. Don't let the e-liquid level fall below the level of the coil, otherwise, you may experience dry hits.

How to Clean a Vaporesso Pod

Not all pods are designed to be cleaned and reused, but if you're looking to try and save a little longer, you could do the following:

Get rid of any remaining liquid from the pod.
Rinse the pod with warm (not hot) water.
Shake out any water and allow to air dry completely before adding any more liquid.

🚫 Do NOT use any soap or detergent, which can leave behind harmful residue.

When to Replace Your Vaporesso Pod

Although you may take great care of your pod, they won't last forever. Apparently, a good time to get a new pod is when:

Burnt flavour
Less vapour thickness
E-liquid has a muted taste
E-liquid leak or gurgling

Generally, Vaporesso pods can last between 1-2 weeks depending on how you use your pod and the type of liquid you use.

Why Choose the Vaporesso XROS Nano?

If you have not yet decided on a Vaporesso device, the Vaporesso XROS Nano is an ideal option for beginner and veteran vapers alike. The Vaporesso XROS Nano has the following features:

1000mAh battery for all-day vaping
Draw-activated firing system
Easy-to-fill pods with leak-proof technology
Stylish and compact design

The Nano is compatible with the entire XROS pod series, which is great for flavour-chasers and MTL vapours.

Where to Buy Authentic Vaporesso Pods in the UK

If you are looking for a reputable retailer for Vaporesso products, then look no further than VapeVilla.co.uk. They have a pretty good selection of Vaporesso products to suit your needs whether you need replacement pods, vape juice or a whole starter kit. There are many great reasons to use them including;

100% authentic Vaporesso product
Great prices
Fast UK-wide delivery
Superb customer service

VapeVilla is the place to go for all of your vaping needs including quality & satisfaction.

5 FAQs About Filling Vaporesso Pods

1. Can I refill Vaporesso pods multiple times?

Yes, Vaporesso pods can be refilled many times, as long as you pay attention to the performance of the coil and to the flavour you are getting.

2. What is the best vape juice for Vaporesso pods?

Most Vaporesso pods work best with a 50/50 VG/PG e-liquid, especially if you are using the XROS series.

3. Do Vaporesso pods leak?

While no pod is 100% leakproof, Vaporesso pods are designed with anti-leak features in mind. If you fill your pod properly and maintain it you will be able to eliminate leaking.

4. How long do I wait after filling before I vape?

If the coil is new you should wait 5-10 minutes, to allow the cotton time to saturate and avoid dry hits.

5. Why does my Vaporesso pod taste burnt?

This usually happens when you are vaping a low level of e-liquid or when you have not let your coil soak up the e-liquid properly after you filled your pod. It may also mean your pod is dead and needs to be replaced..

Final Thoughts: Filling Your Vaporesso Pod the Right Way

Once you know how to fill your Vaporesso pod, the process is easy and quick. By following the right steps, using appropriate e-liquids, and maintaining your Vaporesso pod regularly, you are not just prolonging the life of your pod but ensuring you have a pleasurable vape each time.

If you use a Vaporesso XROS Nano, you arguably have everything you need. Appealing to the user experience, the XROS Nano is a design that is simple to use with a convenient top-fill pod, and it's important to remember that the small things like waiting a few minutes after a refill, makes a big difference over the long run.

For everything vape related, including the latest devices and unique accessories, check out VapeVilla.co.uk - the ultimate place to purchase quality vaping products in the UK.